A reusable planar triggered spark-gap switch batched-fabricated with PCB technology for medium-and low-voltage pulse power systems

Triggered spark-gap switch is a popular discharge switch for pulse power systems. Previous studies have focused on planarizing this switch using thin film techniques in order to meet the requirements of compact size in the systems. Such switches are one-shot due to electrodes being too thin to sufficiently resist spark-erosion. Additionally, these switches did not employ any structures in securing internal gas composition, resulting in inconsistent performance under harsh atmospheres. In this work, a novel planar triggered spark-gap switch (PTS) with a hermetically sealed cavity was batched-prepared with printed circuit board (PCB) technology, to achieve reusability with low cost. The proposed PTS was inspected by micro-computed tomography to ensure PCB techniques meet the requirements of machining precision. The results from electrical experiments demonstrated that PCB PTS were consistent and reusable with lifespan over 20 times. The calculated switch voltage and circuit current were consistent with those derived from real-world measurements. Finally, PCB PTS was used to introduce hexanitrostilbene (HNS) pellets in a pulse power system to verify its performance.     

Thermodynamics and performance of Al/CuO nanothermite with different storage time

The storage stability of energetic materials is important for its application. Here, the storage stability of Al/CuO nanothermite, which was prepared by electrospray method and stored with different storage time, was systematically researched. The activation energy of Al/CuO nanothermite was calculated by differential scanning calorimetry (DSC). The ignition temperature and the curve pressure history of Al/CuO nanothermite was measured using ignition temperature measuring device and constant-volume pressurization tests, respectively. Further, the thermites were characterized by X-ray Diffractometer (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM) and Transmission electron microscopy (TEM). The results show that the morphology of the thermites did not change significantly. The activation energy was decreased from 254.1 kJ/mol to 181.8 kJ/mol after storage for 13 months. When stored for 0, 7 and 13 months, the peak pressures of Al/CuO nanothermite were 685.8 kPa, 626.3 kPa and 625.5 kPa, respectively. In addition to the ignition temperature, it was 775 ℃, 739 ℃ and 754 ℃, respectively. This result indicated that the ignition and combustion properties of Al/CuO nano-thermite are obviously reduced when stored for a long time, at room temperature.     

一种小型的高压毫微秒脉冲发生器及其应用

本文讨论了一种小型的高压毫微秒脉冲装置。该装置可以产生幅值120kV,上升前沿陡度大于5kV/ns、脉宽100ns 的高压脉冲,并已被用作REB 加速器的触发源、高压EMP 模拟器的脉冲源和研究介质击穿特性的能源。     

波速测量层合复合材料冲击损伤实验

在层合复合材料横向冲击试验中,用应变片记录层合板表层在冲击过程中的应变响应,根据波的传播理论和连续损伤力学,从波速变化间接测得冲击下材料的损伤及损伤率。通过实验测得玻璃纤维／环氧（ＧＥ）正交层合板的动态损伤阈值,并证实了ＧＥ复合材料在拉伸阶段比在压缩阶段有更快的损伤扩展速率     

赛船自动固定启航装置的研制

设计了一种新型赛船固定启航装置。该装置主要由浮台、尾固定器和侧固定器组成。整个系统为全飘浮式,不需要水下作业,因而可用于多种竞赛水域,可快速转移赛程。第一届世界龙舟锦标赛应用实践证明,该装置结构简单,使用方便可靠。该装置已获中华人民共和国国家专利     

舰用蓄电池溶液密度测量装置性能改进的力学原理

旧式舰用蓄电池的内部溶液密度测量传感系统是采用弹簧固定的,装置受船体的加速度的影响很大,常常不能正确地反应蓄电池内硫酸溶液的密度变化而给出信号,误差很大．作者对悬浮式的传感方式作出理论上的论证,并分析了传感器浮出液面的体积为浸入溶液中的体积多少倍的情况下加速度的影响最小．     

空间辐射环境中的辐射效应

天然空间辐射环境与辐射效应基本机制是空间飞行器抗辐射加固研究中的两个关键问题, 本文总结了天然空间辐射环境的总体性质, 并对辐射效应基本机制进行了简要的分析, 指出了目前空间飞行器抗辐射加固研究的重点。     

Contrasting the Impacts of Combat and Humanitarian Assistance/Disaster Relief Missions on the Mental Health of Military Service Members

Abstract

We study the differential impacts of combat and humanitarian assistance/disaster relief (HA/DR) missions on the mental health of U.S. Marine Corps members. The deployment experiences of any individual Marine are plausibly random conditional on the observable characteristics which are used to assign Marines into units. Leveraging this exogenous variation, we compare the incidence of post-traumatic stress disorder (PTSD) and suicide deaths among Marines who deployed to either Operation Enduring Freedom/Operation Iraqi Freedom (OEF/OIF) or HA/DR missions between 2001 and 2011. We find that the hazard of PTSD is close to eight times higher among Marines returning from OEF/OIF compared to those never deployed, and just 1.33 times higher among those returning from HA/DR (and never participated in OEF/OIF). Those returning from OEF/OIF missions are 1.81 times more likely than those never deployed to die by suicide when they were still active duty, and the hazard increases to almost 3 after they have left the military. In contrast, we find no difference in the hazards of suicide death between those that deployed to only HA/DR missions and non-deployed Marines.     

A hybrid method for simulation factor screening

Factor screening is performed to eliminate unimportant factors so that the remaining important factors can be more thoroughly studied in later experiments. Controlled sequential bifurcation (CSB) and controlled sequential factorial design (CSFD) are two new screening methods for discrete‐event simulations. Both methods use hypothesis testing procedures to control the Type I Error and power of the screening results. The scenarios for which each method is most efficient are complementary. This study proposes a two‐stage hybrid approach that combines CSFD and an improved CSB called CSB‐X. In Phase 1, a prescreening procedure will estimate each effect and determine whether CSB‐X or CSFD will be used for further screening. In Phase 2, CSB‐X and CSFD are performed separately based on the assignment of Phase 1. The new method usually has the same error control as CSB‐X and CSFD. The efficiency, on the other hand, is usually much better than either component method. © 2009 Wiley Periodicals, Inc. Naval Research Logistics, 2010     

基于拉盖尔模型的超声信号渡越时间测量性能分析

传统窄带模型仅能通过数值计算统计出超声信号渡越时间的测量性能。针对这一问题,提出基于拉盖尔模型计算理论克拉下限的方法。研究了拉盖尔函数及其时间导数的性质,得到时间导数内积矩阵,并将其应用到费舍尔矩阵中,能够快速精确计算克拉下限。对混合指数模型仿真表明,在高斯白噪声背景下,渡越时间方差与理论克拉下限具有良好的一致性;受窄带噪声和反射等因素影响,实测数据的渡越时间方差与理论克拉下限存在较大偏差。